Torch Technologies INC

SINGLE AWARD TO AGAINST GSA OASIS SB R POOL 5B FOR HWIL MISSILE TO ACQUIRE SOFTWARE/SYSTEMS/SIMULATION ENGINEERING AND COMPUTER RESOURCE ENGINEERING SUPPORT FOR THE AVIATION AND MISSILE CENTER, S3I DIRECTORATE, HWIL / VIRTUAL SIMULATORS MISSION AREA.

PACIFICTORCH TASK ORDER 01

PROVIDES FOR NON-PERSONAL ADVISORY AND ASSISTANCE SERVICES (A&AS) TO FULLY SUPPORT AEROSPACE RESEARCH, DEVELOPMENT, TEST AND EVALUATION (RDT&E) ACTIVITIES AT THE TENANT ORGANIZATIONS LOCATED AT EGLIN AFB. IT EMBRACES STRATEGIC AND ENTERPRISE-WIDE CONCEPTS BY MAKING THESE SERVICES AVAILABLE IN SUPPORT OF INTERRELATED AND JOINT RDT&E EFFORTS. AN ENTERPRISE-WIDE APPROACH PROVIDES, IN TERMS OF BENEFITS, THE ABILITY TO EXPAND AND CREATE NEW RELATIONSHIPS IN PURSUIT OF SHARED DEVELOPMENTS, NEW TECHNICAL AREAS, E.G. UNMANNED AERIAL VEHICLES, AND MAXIMIZE SYNERGIES, EFFICIENCIES AND INTEROPERABILITIES WITHIN AND BETWEEN THESE STAKE HOLDER UNITS TO FULLY SUPPORT THESE SYSTEMS. THIS TMAS 2 TO IS THE CONTRACTOR’S TOOL FOR PROVIDING AGILE, RESPONSIVE AND AFFORDABLE A&AS, INNOVATIVE PROCESSES, CONCEPTS AND SOLUTIONS, COST SAVINGS, CONTINUOUS PROCESS IMPROVEMENTS, AND BEST COMMERCIAL PRACTICES IN SUPPORT OF AIR FORCE TEST CENTER (AFTC), ITS PARTNERS, ALLIANCES AND CUSTOMERS.

PROVIDES FOR NON-PERSONAL ADVISORY AND ASSISTANCE SERVICES (A&AS) TO FULLY SUPPORT AEROSPACE RESEARCH, DEVELOPMENT, TEST AND EVALUATION (RDT&E) ACTIVITIES AT THE TENANT ORGANIZATIONS LOCATED AT EGLIN AFB. IT EMBRACES STRATEGIC AND ENTERPRISE-WIDE CONCEPTS BY MAKING THESE SERVICES AVAILABLE IN SUPPORT OF INTERRELATED AND JOINT RDT&E EFFORTS. AN ENTERPRISE-WIDE APPROACH PROVIDES, IN TERMS OF BENEFITS, THE ABILITY TO EXPAND AND CREATE NEW RELATIONSHIPS IN PURSUIT OF SHARED DEVELOPMENTS, NEW TECHNICAL AREAS, E.G. UNMANNED AERIAL VEHICLES, AND MAXIMIZE SYNERGIES, EFFICIENCIES AND INTEROPERABILITIES WITHIN AND BETWEEN THESE STAKE HOLDER UNITS TO FULLY SUPPORT THESE SYSTEMS. THIS TMAS 2 TO IS THE CONTRACTOR’S TOOL FOR PROVIDING AGILE, RESPONSIVE AND AFFORDABLE A&AS, INNOVATIVE PROCESSES, CONCEPTS AND SOLUTIONS, COST SAVINGS, CONTINUOUS PROCESS IMPROVEMENTS, AND BEST COMMERCIAL PRACTICES IN SUPPORT OF AIR FORCE TEST CENTER (AFTC), ITS PARTNERS, ALLIANCES AND CUSTOMERS.

THE OBJECTIVE OF THIS PERFORMANCE WORK STATEMENT (PWS) IS TO PROVIDE ADVISORY AND ASSISTANCE SERVICES FOR TECHNICAL AND ENGINEERING SUPPORT FOR THE AVIATION AND MISSILE CENTER (AVMC), COMBAT CAPABILITIES DEVELOPMENT COMMAND (DEVCOM) IN THE PERFORMANCE OF ITS OVERALL MISSION. THIS MISSION INCLUDES TECHNOLOGY DEVELOPMENT ASSISTANCE AND PROGRAM SUPPORT EFFORTS IN THE AREAS OF SENSORS, SIGNAL PROCESSING, TARGET ACQUISITION, GUIDANCE, NAVIGATION, CONTROL, ELECTRONICS, COMPUTERS, SYSTEM DEVELOPMENT AND WEAPONS EVALUATION.

(2) SA-20 TEL GARGOYLE HIGH DEF TARGET, (1) SA-20 TER TOMBSTONE TARGET, AND (1) SA-22 GRAYHOUND TRUCK VARIANT TARGET

(1) CUSTOMIZED 2U HA LIGHTSPEED ENCLOSURE (UP TO 40GB/S): INCL. 1350TB

THE OBJECTIVE OF THIS PERFORMANCE WORK STATEMENT (PWS) IS TO PROVIDE ADVISORY AND ASSISTANCE SERVICES FOR TECHNICAL AND ENGINEERING SUPPORT FOR THE AVIATION AND MISSILE CENTER (AVMC), COMBAT CAPABILITIES DEVELOPMENT COMMAND (DEVCOM) IN THE PERFORMANCE OF ITS OVERALL MISSION. THIS MISSION INCLUDES TECHNOLOGY DEVELOPMENT ASSISTANCE AND PROGRAM SUPPORT EFFORTS IN THE AREAS OF SENSORS, SIGNAL PROCESSING, TARGET ACQUISITION, GUIDANCE, NAVIGATION, CONTROL, ELECTRONICS, COMPUTERS, SYSTEM DEVELOPMENT AND WEAPONS EVALUATION

PROVIDE MODELING, SIMULATION, ANALYSIS, INTEGRATION, DEVELOPMENT, EXECUTION, AND ANALYSES OF THE BMDS/ DISCRIMINATION IMPROVEMENT FOR HOMELAND DEFENSE (DIHD) NEXT GENERATION INTERCEPTOR, GLIDE PHASE INTERCEPTOR PROGRAMS, AND THE NEW DEFENSE OF GUAM PROGRAM. THIS M&S ENGINEERING AND ANALYSIS EFFORT WILL SUPPORT THE ANALYSIS AND DEVELOPMENT RELATED TO COMPLEX THREAT MODEL DEVELOPMENT TO DIRECTLY SUPPORT THE MDA DIHD PROGRAM. THE CONTRACTOR SHALL PARTICIPATE IN SENIOR LEVEL REVIEWS OF DIHD ACTIVITIES AND ANALYSIS. THE CONTRACTOR SHALL FACILITATE THE SYSTEMS ENGINEERING PROCESSES SUPPORTING MDA DIHD PROGRAM SOFTWARE DEVELOPMENT.

THE OBJECTIVE OF THIS PERFORMANCE WORK STATEMENT (PWS) IS TO PROVIDE ADVISORY AND ASSISTANCE SERVICES FOR TECHNICAL AND ENGINEERING SUPPORT FOR THE AVIATION AND MISSILE CENTER (AVMC), COMBAT CAPABILITIES DEVELOPMENT COMMAND (DEVCOM) IN THE PERFORMANCE OF ITS OVERALL MISSION. THIS MISSION INCLUDES TECHNOLOGY DEVELOPMENT ASSISTANCE AND PROGRAM SUPPORT EFFORTS IN THE AREAS OF SENSORS, SIGNAL PROCESSING, TARGET ACQUISITION, GUIDANCE, NAVIGATION, CONTROL, ELECTRONICS, COMPUTERS, SYSTEM DEVELOPMENT AND WEAPONS EVALUATION

1.0 MISSION OBJECTIVE: THE AVMC SRD PROVIDES THE COMPLETE RANGEOF SPECIALTY ENGINEERING EXPERTISE AND ASSOCIATED TECHNICAL SUPPORT TOPROGRAMS AND PRODUCTS ON BEHALF OF A DIVERSE AND EXPANDING CUSTOMERBASE INCLUDING DEPARTMENT OF DEFENSE, DEPARTMENT OF STATE, OTHERGOVERNMENT AGENCIES, AND FOREIGN MILITARY SALES (FMS). SRD’S SPECIALTYENGINEERING SUPPORT ACTIVITIES INCLUDE THE DEVELOPMENT, PRODUCTION,ACQUISITION, TEST AND EVALUATION, CERTIFICATION, DELIVERY, SUSTAINMENT,MODIFICATION, UPGRADE, AND RECLAMATION OF SUPPORTED AVIATION, MISSILE,GROUND, SEA, AND SOLDIER SYSTEMS AND ASSOCIATED DEVELOPMENT,PRODUCTION, AND SUSTAINMENT SUPPORT EQUIPMENT. THE INTENT OF THIS TASKORDER IS TO PROVIDE A FOUNDATION CAPABILITY FOR SUPPORTING SRD’S CORECOMPETENCY OF MATERIEL SUITABILITY. THE CONTRACTOR TEAM SHALL ACCOMPLISHTHIS THROUGH SUPPORTING A BROAD RANGE OF SPECIALTY ENGINEERING ANDANALYTICAL REQUIREMENTS FOR PROJECTS AND SYSTEMS SUPPORTED BY THE CCDC-SRD OR ITS CUSTOMERS ACROSS ITS CORE FUNCTIONAL SUPPORT AREAS OF PRODUCTASSURANCE, AND PRODUCTION & SUSTAINMENT.

(6) SA-27 TELAR TURRET; DRAWING PACKAGE TTSA27-6000

(1) CUSTOM AFF C800 NETAPP STORAGE SYSTEM

ENGINEERING SUPPORT FOR COUNTER UAS SYSTEMS PERFORMANCE, ANALYSIS AND TEST

THIS PERFORMANCE WORK STATEMENT (PWS) COVERS ENGINEERING SERVICES. THESE SERVICES ARE IN SUPPORT OF THE FUTURE LONG RANGE ASSAULT AIRCRAFT (FLRAA) PROJECT MANAGEMENT (PM) OFFICE. THE FLRAA PROGRAM IS A HIGHLY TECHNICAL PROJECT REQUIRING THE VERY BEST TECHNICAL EXPERTISE TO SUPPORT THIS HIGHLY COMPLEX DEVELOPMENT PROGRAM. PM FLRAA€„¢S OBJECTIVE IS TO OBTAIN AN ENGINEERING SERVICES CONTRACTOR THAT PROVIDES EXCEPTIONAL TECHNICAL EXPERTISE WITH PROVEN AVIATION DEVELOPMENT EXPERIENCE TO SUPPORT EXECUTION OF THIS HIGHLY TECHNICAL AVIATION DEVELOPMENT PROJECT. SPECIFICALLY, SERVICES WILL SUPPORT PM FLRAA IN THE AREAS OF SYSTEMS ENGINEERING, AIR VEHICLE AND INTEGRATION, TEST AND EVALUATION, MISSION SYSTEMS, PRODUCTION AND QUALITY ENGINEERING, AND SUSTAINING ENGINEERING.

THE OBJECTIVE OF THIS PERFORMANCE WORK STATEMENT (PWS) IS TO PROVIDE ADVISORY AND ASSISTANCE SERVICES FOR TECHNICAL AND ENGINEERING SUPPORT FOR THE AVIATION AND MISSILE CENTER (AVMC), COMBAT CAPABILITIES DEVELOPMENT COMMAND (DEVCOM) IN THE PERFORMANCE OF ITS OVERALL MISSION. THIS MISSION INCLUDES TECHNOLOGY DEVELOPMENT ASSISTANCE AND PROGRAM SUPPORT EFFORTS IN THE AREAS OF SENSORS, SIGNAL PROCESSING, TARGET ACQUISITION, GUIDANCE, NAVIGATION, CONTROL, ELECTRONICS, COMPUTERS, SYSTEM DEVELOPMENT AND WEAPONS EVALUATION

PROVIDE SIMULATION, INTEGRATION, DEVELOPMENT, EXECUTION, AND ANALYSES OF C-UAS TECHNOLOGIES AND SUPPORTING SOFTWARE. THIS MODELING AND SIMULATION (M&S) ENGINEERING AND ANALYSIS EFFORT WILL SUPPORT C-UAS TECHNOLOGY SYSTEM PERFORMANCE ASSESSMENTS THAT INCLUDE BUT ARE NOT LIMITED TO MODELING AND SIMULATION OF FRIENDLY AND THREAT UAS, NECESSARY SOFTWARE DEVELOPMENT EFFORTS, INTEGRATION OF THREAT UAS TECHNOLOGIES AND C-UAS TESTING AND EXECUTION, AND ENGINEERING STUDIES OF THE C-UAS ELEMENTS.

THE OBJECTIVE OF THIS PERFORMANCE WORK STATEMENT (PWS) IS TO PROVIDE ADVISORY AND ASSISTANCE SERVICES FOR TECHNICAL AND ENGINEERING SUPPORT FOR THE AVIATION AND MISSILE CENTER (AVMC), COMBAT CAPABILITIES DEVELOPMENT COMMAND (DEVCOM) IN THE PERFORMANCE OF ITS OVERALL MISSION. THIS MISSION INCLUDES TECHNOLOGY DEVELOPMENT ASSISTANCE AND PROGRAM SUPPORT EFFORTS IN THE AREAS OF SENSORS, SIGNAL PROCESSING, TARGET ACQUISITION, GUIDANCE, NAVIGATION, CONTROL, ELECTRONICS, COMPUTERS, SYSTEM DEVELOPMENT AND WEAPONS EVALUATION

THE OBJECTIVE OF THIS PERFORMANCE WORK STATEMENT (PWS) IS TO PROVIDE ADVISORY AND ASSISTANCE SERVICES FOR TECHNICAL AND ENGINEERING SUPPORT FOR THE AVIATION AND MISSILE CENTER (AVMC), COMBAT CAPABILITIES DEVELOPMENT COMMAND (DEVCOM) IN THE PERFORMANCE OF ITS OVERALL MISSION. THIS MISSION INCLUDES TECHNOLOGY DEVELOPMENT ASSISTANCE AND PROGRAM SUPPORT EFFORTS IN THE AREAS OF SENSORS, SIGNAL PROCESSING, TARGET ACQUISITION, GUIDANCE, NAVIGATION, CONTROL, ELECTRONICS, COMPUTERS, SYSTEM DEVELOPMENT AND WEAPONS EVALUATION

(12) POWEREDGE R750 SERVER (210-AYCG)

1.0 MISSION OBJECTIVE: THE AVMC SRD PROVIDES THE COMPLETE RANGE OF SPECIALTY ENGINEERING EXPERTISE AND ASSOCIATED TECHNICAL SUPPORT TO PROGRAMS AND PRODUCTS ON BEHALF OF A DIVERSE AND EXPANDING CUSTOMER BASE INCLUDING DEPARTMENT OF DEFENSE, DEPARTMENT OF STATE, OTHER GOVERNMENT AGENCIES, AND FOREIGN MILITARY SALES (FMS). SRD€„¢S SPECIALTY ENGINEERING SUPPORT ACTIVITIES INCLUDE THE DEVELOPMENT, PRODUCTION, ACQUISITION, TEST AND EVALUATION, CERTIFICATION, DELIVERY, SUSTAINMENT, MODIFICATION, UPGRADE, AND RECLAMATION OF SUPPORTED AVIATION, MISSILE, GROUND, SEA, AND SOLDIER SYSTEMS AND ASSOCIATED DEVELOPMENT, PRODUCTION, AND SUSTAINMENT SUPPORT EQUIPMENT. THE INTENT OF THIS TASK ORDER IS TO PROVIDE A FOUNDATION CAPABILITY FOR SUPPORTING SRD€„¢S CORE COMPETENCY OF MATERIEL SUITABILITY. THE CONTRACTOR TEAM SHALL ACCOMPLISH THIS THROUGH SUPPORTING A BROAD RANGE OF SPECIALTY ENGINEERING AND ANALYTICAL REQUIREMENTS FOR PROJECTS AND SYSTEMS SUPPORTED BY THE CCDC-SRD OR ITS CUSTOMERS ACROSS ITS CORE FUNCTIONAL SUPPORT AREAS OF PRODUCT ASSURANCE, AND PRODUCTION & SUSTAINMENT. THE CONTRACTOR SUPPORT TARGETED BY THIS TASK ORDER INCLUDES THE SPECIALTY ENGINEERING, ACQUISITION, FIELDING, SUSTAINMENT, AND ASSOCIATED TECHNICAL SUPPORT/SUBJECT MATTER EXPERTISE NECESSARY TO ACCOMPLISH RESPONSIVE AND COST-EFFECTIVE ENGINEERING SOLUTIONS FOR THE SRD AND ITS CUSTOMER BASE. THE DISTINGUISHING ASPECT OF THIS TASK ORDER IS THE DEMONSTRATED TECHNICAL DEPTH REQUIRED OF THE SUPPORTING CONTRACTOR TEAM ACROSS EACH OF SRD€„¢S INDIVIDUAL DIVISIONALLY-ALIGNED SPECIALTY ENGINEERING AREAS OF EXPERTISE. THIS DEPTH IN THE SPECIFIC ENGINEERING AREAS CORE TO SRD€„¢S MATERIEL SUITABILITY MISSION SERVES TO FUNDAMENTALLY DIFFERENTIATE THIS TASK ORDER FROM EITHER THE HIGHER-LEVEL AND GENERALIZED TECHNICAL EXPERTISE REQUIRED TO SUPPORT S3I€„¢S SYSTEMS ENGINEERING MISSION, OR THE CORE RESEARCH EXPERTISE REQUIRED TO SUPPORT TDD€„¢S RESEARCH & DEVELOPMENT MISSION. WHILE IT IS UNDERSTOOD AND APPRECIATED THAT THE INDIVIDUAL SRD MATERIEL SUITABILITY BRANCHES MAY HAVE UNIQUE SUBJECT MATTER EXPERTISE REQUIREMENTS BEYOND THE SCOPE OF THIS BASELINE TASK ORDER AND THEREFORE REQUIRE OTHER EXTERNAL DEDICATED SUPPORT, IT IS THE INTENT OF SRD THAT THIS TASK ORDER PROVIDE ITS DIVISIONS WITH THE CORE ENGINEERING CAPABILITIES TO ACCOMPLISH A LARGE CROSS-SECTION OF THEIR INDIVIDUAL SPECIALTY ENGINEERING MISSIONS. THE INTENDED SCOPE OF THIS TASK ORDER DOES INCLUDE ENGINEERING AND TECHNICAL SUPPORT FOR THE LIMITED OVERLAP OF THE AIRWORTHINESS MISSION INTO THE MATERIEL SUITABILITY AREAS OF QUALITY ENGINEERING AND INDUSTRIAL OPERATIONS TO THE EXTENT DEFINED BY THE INDIVIDUAL TECHNICAL DIRECTIONS. ADDITIONALLY, ANY PROPOSED CONTRACTOR TEAM LEADERSHIP SHALL ALSO PROVIDE TECHNICAL SUPPORT TO REDUCE TASK LOAD ON THE TOTAL AVMC CONTRACTOR WORK FORCE. A UNIQUE ASPECT OF EFFORTS UNDER THIS TASK ORDER IS THAT THEY ARE FOCUSED ON THE PERSPECTIVE OF AN OPERATOR AND/OR MAINTAINER. THE SUPPORT TO ACCOMPLISH THESE TASKS WILL BE IDENTIFIED BY INDIVIDUAL TECHNICAL DIRECTIONS (TDS) DEFINING

(1) CUSTOMIZED POWEREDGE MX7000 ENCLOSURE AND (8) CUSTOMIZED POWEREDGE MX760C SERVERS

THIS PERFORMANCE WORK STATEMENT (PWS) COVERS ENGINEERING SERVICES. THESE SERVICES ARE IN SUPPORT OF THE FUTURE LONG RANGE ASSAULT AIRCRAFT (FLRAA) PROJECT MANAGEMENT (PM) OFFICE. THE FLRAA PROGRAM IS A HIGHLY TECHNICAL PROJECT REQUIRING THE VERY BEST TECHNICAL EXPERTISE TO SUPPORT THIS HIGHLY COMPLEX DEVELOPMENT PROGRAM. PM FLRAA’S OBJECTIVE IS TO OBTAIN AN ENGINEERING SERVICES CONTRACTOR THAT PROVIDES EXCEPTIONAL TECHNICAL EXPERTISE WITH PROVEN AVIATION DEVELOPMENT EXPERIENCE TO SUPPORT EXECUTION OF THIS HIGHLY TECHNICAL AVIATION DEVELOPMENT PROJECT. SPECIFICALLY, SERVICES WILL SUPPORT PM FLRAA IN THE AREAS OF SYSTEMS ENGINEERING, AIR VEHICLE AND INTEGRATION, TEST AND EVALUATION, MISSION SYSTEMS, PRODUCTION AND QUALITY ENGINEERING, AND SUSTAININGENGINEERING.

THE CONTRACTOR SHALL SUPPORT SYSTEM ENGINEERING TEST AND PERFORMANCE ANALYSIS USED TO ASSESS MDS PERFORMANCE BASED ON TEST, SIMULATION, AND WAR FIGHTER EVENTS.

(126) KA-BAND UP CONVERTER MODULES WITH EOL REPAIR MATERIAL LIFETIME MATERIALS

(4) SI# BN5J19 POWEREDGE XR4000R, (4) POWEREDGE XR4000W AND (16) POWEREDGE XR4510C

THE OBJECTIVE OF THIS PERFORMANCE WORK STATEMENT (PWS) IS TO PROVIDE ADVISORY AND ASSISTANCE SERVICES FOR TECHNICAL AND ENGINEERING SUPPORT FOR THE AVIATION AND MISSILE CENTER (AVMC), COMBAT CAPABILITIES DEVELOPMENT COMMAND (DEVCOM) IN THE PERFORMANCE OF ITS OVERALL MISSION. THIS MISSION INCLUDES TECHNOLOGY DEVELOPMENT ASSISTANCE AND PROGRAM SUPPORT EFFORTS IN THE AREAS OF SENSORS, SIGNAL PROCESSING, TARGET ACQUISITION, GUIDANCE, NAVIGATION, CONTROL, ELECTRONICS, COMPUTERS, SYSTEM DEVELOPMENT AND WEAPONS EVALUATION

(33) DELL POWEREDGE R6525 SERVER (210-ATCF)

1.0 MISSION OBJECTIVE: THE AVMC SRD PROVIDES THE COMPLETE RANGE OF SPECIALTY ENGINEERING EXPERTISE AND ASSOCIATED TECHNICAL SUPPORT TO PROGRAMS AND PRODUCTS ON BEHALF OF A DIVERSE AND EXPANDING CUSTOMER BASE INCLUDING DEPARTMENT OF DEFENSE, DEPARTMENT OF STATE, OTHER GOVERNMENT AGENCIES, AND FOREIGN MILITARY SALES (FMS). SRD€„¢S SPECIALTY ENGINEERING SUPPORT ACTIVITIES INCLUDE THE DEVELOPMENT, PRODUCTION, ACQUISITION, TEST AND EVALUATION, CERTIFICATION, DELIVERY, SUSTAINMENT, MODIFICATION, UPGRADE, AND RECLAMATION OF SUPPORTED AVIATION, MISSILE, GROUND, SEA, AND SOLDIER SYSTEMS AND ASSOCIATED DEVELOPMENT, PRODUCTION, AND SUSTAINMENT SUPPORT EQUIPMENT. THE INTENT OF THIS TASK ORDER IS TO PROVIDE A FOUNDATION CAPABILITY FOR SUPPORTING SRD€„¢S CORE COMPETENCY OF MATERIEL SUITABILITY. THE CONTRACTOR TEAM SHALL ACCOMPLISH THIS THROUGH SUPPORTING A BROAD RANGE OF SPECIALTY ENGINEERING AND ANALYTICAL REQUIREMENTS FOR PROJECTS AND SYSTEMS SUPPORTED BY THE CCDC-SRD OR ITS CUSTOMERS ACROSS ITS CORE FUNCTIONAL SUPPORT AREAS OF PRODUCT ASSURANCE, AND PRODUCTION & SUSTAINMENT. THE CONTRACTOR SUPPORT TARGETED BY THIS TASK ORDER INCLUDES THE SPECIALTY ENGINEERING, ACQUISITION, FIELDING, SUSTAINMENT, AND ASSOCIATED TECHNICAL SUPPORT/SUBJECT MATTER EXPERTISE NECESSARY TO ACCOMPLISH RESPONSIVE AND COST-EFFECTIVE ENGINEERING SOLUTIONS FOR THE SRD AND ITS CUSTOMER BASE. THE DISTINGUISHING ASPECT OF THIS TASK ORDER IS THE DEMONSTRATED TECHNICAL DEPTH REQUIRED OF THE SUPPORTING CONTRACTOR TEAM ACROSS EACH OF SRD€„¢S INDIVIDUAL DIVISIONALLY-ALIGNED SPECIALTY ENGINEERING AREAS OF EXPERTISE. THIS DEPTH IN THE SPECIFIC ENGINEERING AREAS CORE TO SRD€„¢S MATERIEL SUITABILITY MISSION SERVES TO FUNDAMENTALLY DIFFERENTIATE THIS TASK ORDER FROM EITHER THE HIGHER-LEVEL AND GENERALIZED TECHNICAL EXPERTISE REQUIRED TO SUPPORT S3I€„¢S SYSTEMS ENGINEERING MISSION, OR THE CORE RESEARCH EXPERTISE REQUIRED TO SUPPORT TDD€„¢S RESEARCH & DEVELOPMENT MISSION. WHILE IT IS UNDERSTOOD AND APPRECIATED THAT THE INDIVIDUAL SRD MATERIEL SUITABILITY BRANCHES MAY HAVE UNIQUE SUBJECT MATTER EXPERTISE REQUIREMENTS BEYOND THE SCOPE OF THIS BASELINE TASK ORDER AND THEREFORE REQUIRE OTHER EXTERNAL DEDICATED SUPPORT, IT IS THE INTENT OF SRD THAT THIS TASK ORDER PROVIDE ITS DIVISIONS WITH THE CORE ENGINEERING CAPABILITIES TO ACCOMPLISH A LARGE CROSS-SECTION OF THEIR INDIVIDUAL SPECIALTY ENGINEERING MISSIONS. THE INTENDED SCOPE OF THIS TASK ORDER DOES INCLUDE ENGINEERING AND TECHNICAL SUPPORT FOR THE LIMITED OVERLAP OF THE AIRWORTHINESS MISSION INTO THE MATERIEL SUITABILITY AREAS OF QUALITY ENGINEERING AND INDUSTRIAL OPERATIONS TO THE EXTENT DEFINED BY THE INDIVIDUAL TECHNICAL DIRECTIONS. ADDITIONALLY, ANY PROPOSED CONTRACTOR TEAM LEADERSHIP SHALL ALSO PROVIDE TECHNICAL SUPPORT TO REDUCE TASK LOAD ON THE TOTAL AVMC CONTRACTOR WORK FORCE. A UNIQUE ASPECT OF EFFORTS UNDER THIS TASK ORDER IS THAT THEY ARE FOCUSED ON THE PERSPECTIVE OF AN OPERATOR AND/OR MAINTAINER. THE SUPPORT TO ACCOMPLISH THESE TASKS WILL BE IDENTIFIED BY INDIVIDUAL TECHNICAL DIRECTIONS (TDS) DEFINING

(2) SA-23B TRACKED SURROGATES WITH NRE FEE

CUSTOMIZED AFF-A400 HA SYSTEM,ETHERNET BUNDLE WITH NET APP SUPPORTEDGE, CONSULTING, AND TRAINING

WORK PERFORMED IN SUPPORT OF AMSA PWS

IN SUPPORT OF THE RS3 FLRAA PWS.

WORK PERFORMED IN SUPPORT OF AMSA PWS

(3) YELLOWBRICK AN1-VD-103 DATA WAREHOUSE, 1 YEAR SUBSCRIPTION, AND (3) YELLOWBRICK GEN1-HC-104 DATA WAREHOUSE, 1 YEAR SUBSCRIPTION

PROVIDES FOR NON-PERSONAL ADVISORY AND ASSISTANCE SERVICES (A&AS) TO FULLY SUPPORT AEROSPACE RESEARCH, DEVELOPMENT, TEST AND EVALUATION (RDT&E) ACTIVITIES AT THE TENANT ORGANIZATIONS LOCATED AT EGLIN AFB. IT EMBRACES STRATEGIC AND ENTERPRISE-WIDE CONCEPTS BY MAKING THESE SERVICES AVAILABLE IN SUPPORT OF INTERRELATED AND JOINT RDT&E EFFORTS. AN ENTERPRISE-WIDE APPROACH PROVIDES, IN TERMS OF BENEFITS, THE ABILITY TO EXPAND AND CREATE NEW RELATIONSHIPS IN PURSUIT OF SHARED DEVELOPMENTS, NEW TECHNICAL AREAS, E.G. UNMANNED AERIAL VEHICLES, AND MAXIMIZE SYNERGIES, EFFICIENCIES AND INTEROPERABILITIES WITHIN AND BETWEEN THESE STAKE HOLDER UNITS TO FULLY SUPPORT THESE SYSTEMS. THIS TMAS 2 TO IS THE CONTRACTOR’S TOOL FOR PROVIDING AGILE, RESPONSIVE AND AFFORDABLE A&AS, INNOVATIVE PROCESSES, CONCEPTS AND SOLUTIONS, COST SAVINGS, CONTINUOUS PROCESS IMPROVEMENTS, AND BEST COMMERCIAL PRACTICES IN SUPPORT OF AIR FORCE TEST CENTER (AFTC), ITS PARTNERS, ALLIANCES AND CUSTOMERS.

(3) SA-17 GRIZZLY TELAR HIGH FIDELITY TARGETS

THE CONTRACTOR SHALL SUPPORT SYSTEM ENGINEERING TEST AND PERFORMANCE ANALYSIS USED TO ASSESS MDS PERFORMANCE BASED ON TEST, SIMULATION, AND WAR FIGHTER EVENTS.

THE CONTRACTOR SHALL PROVIDE THE LABOR AND TRAVEL TO ACCOMPLISH THE SUBTASKS LISTED IN THE DESCRIPTION OF WORK PRESENTED IN THE PARAGRAPHS BELOW AND LINE ITEMS FUNDED BY THIS TASK ORDER (TO). ALL PARAGRAPHS CONTAINED WITHIN THIS PWS ARE APPLICABLE AS REFERENCED IN THE EXPRESS BASIC STATEMENT OF WORK - PARAGRAPHS 3.12 MANUFACTURING SCIENCE AND TECHNOLOGY (MST), 3-15 PRODUCT ASSURANCE, AND PARAGRAPH 3.8 (IO3-C). ALL TASKS SHALL BE PERFORMED USING METHODOLOGY, PRINCIPLES AND PROCEDURES THAT ARE RECOGNIZED BY THE SOCIETY OF MANUFACTURING ENGINEERS (SME), THE INSTITUTE OF INDUSTRIAL ENGINEERS (IIE), THE INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE), THE AMERICAN SOCIETY FOR QUALITY (ASQ) AND SHALL BE IN ACCORDANCE WITH REQUIRED DOD, DA, AMC, RDECOM, AMCOM AND PEO GUIDANCE SUCH AS DOD DIRECTIVE 4140.1-R DOD SUPPLY CHAIN MATERIEL MANAGEMENT REGULATION, SD-22 DIMINISHING MANUFACTURING SOURCES AND MATERIAL SHORTAGES (DMSMS) GUIDEBOOK, ARMY REGULATION 700-90 ARMY INDUSTRIAL BASE PROCESS, EIA GEB1 DMSMS MANAGEMENT PRACTICES.

(24) SP2T ABSORPTIVE INPUT & OUTPUT SWITCHES, (36) SP4T ABSORPTIVE INPUT & OUTPUT SWITCHES, AND (168) SP8T ABSORPTIVE INPUT & OUTPUT SWITCHES

THE CONTRACTOR SHALL PERFORM THE TASKS DESCRIBED WITHIN THE CONTENTS OF THIS PWS AND PROVIDE THE LABOR, MATERIALS AND OTHER DIRECT COSTS TO PROVIDE THE SERVICES SPECIFIED BELOW. TECHNICAL DIRECTIONS (TD) WILL BE ISSUED BY THE GOVERNMENT AS INCREMENTAL FUNDING MODIFICATIONS TO FURTHER DEFINE THE EFFORT PERFORMED UNDER THIS PWS.

THE OBJECTIVE OF THIS PERFORMANCE WORK STATEMENT (PWS) IS TO PROVIDE ADVISORY AND ASSISTANCE SERVICES FOR TECHNICAL AND ENGINEERING SUPPORT FOR THE AVIATION AND MISSILE CENTER (AVMC), COMBAT CAPABILITIES DEVELOPMENT COMMAND (DEVCOM) IN THE PERFORMANCE OF ITS OVERALL MISSION. THIS MISSION INCLUDES TECHNOLOGY DEVELOPMENT ASSISTANCE AND PROGRAM SUPPORT EFFORTS IN THE AREAS OF SENSORS, SIGNAL PROCESSING, TARGET ACQUISITION, GUIDANCE, NAVIGATION, CONTROL, ELECTRONICS, COMPUTERS, SYSTEM DEVELOPMENT AND WEAPONS EVALUATION

THE OBJECTIVE OF THIS EFFORT IS TO ACQUIRE ENGINEERING AND PROFESSIONAL SERVICES SUPPORTING AVIATION AND MISSILE ELEMENT MODELS, SIMULATIONS, AND ANALYSIS FOR THE CCDC AVMC, S3I DIRECTORATE, M&S AREA. THE M&S AREA PROVIDES VARIOUS TYPES OF MODELING AND SIMULATION SUPPORT TO ALL BRANCHES OF THE ARMED SERVICES, MULTIPLE PROGRAM OFFICES, AND OTHERS FOR DEVELOPMENT AND IMPROVEMENTS TO THEIR SYSTEMS. TASKS MAY ALSO INVOLVE RELATED NON-US SYSTEMS.

THE CONTRACTOR SHALL SUPPORT IN THE PERFORMANCE OF SYSTEM ENGINEERING, THEORETICAL ANALYSES, SIMULATION AND MODELING, RESEARCH AND DEVELOPMENT HARDWARE DESIGN, SOFTWARE/ALGORITHM DEVELOPMENT, HARDWARE FABRICATION, SYSTEM INTEGRATION, ELECTRICAL AND MECHANICAL INTERFACE DESIGN, HARDWARE IDENTIFICATION AND PROCUREMENT, TEST PLANNING, TEST SUPPORT AND DATA ACQUISITION, REDUCTION AND REPORTING TO SUPPORT RESEARCH AND DEVELOPMENT FOR THE FOLLOWING CATEGORIES OF SENSOR SYSTEMS, SUBSYSTEMS, AND TECHNOLOGY USED FOR MISSILE GUIDANCE AND FIRE CONTROL APPLICATIONS: TERMINAL HOMING SYSTEMS INCLUDING BOTH PASSIVE AND ACTIVE SENSORS SUCH AS INFRARED (IR), RADIO FREQUENCY (RF), MILLIMETER WAVE (MMW), ELECTRO OPTICAL (EO) AND ACOUSTIC WITH AND WITHOUT FIBER OPTIC OR RF DATA LINKS TO THE GROUND AND/OR OTHER AERIAL VEHICLE; COMMAND GUIDANCE INCLUDING LASER, MMW, RF, AND WIRE; SEMI-ACTIVE GUIDANCE INCLUDING LASERS AND RF ILLUMINATORS; DUAL MODE GUIDANCE INCLUDING VARIOUS COMBINATIONS OF SENSORS, GUIDANCE MODES, GROUND AND AIRBORNE PLATFORM SENSOR SYSTEMS FOR DETECTION, RECOGNITION, IDENTIFICATION AND TRACKING TO SUPPORT TARGET ENGAGEMENT. 2.1.2. THE CONTRACTOR SHALL SUPPORT SYSTEM ENGINEERING ANALYSIS, DESIGN, HARDWARE AND SOFTWARE DEVELOPMENT, MODELING AND SIMULATION, AND FABRICATION IN SUPPORT OF TECHNOLOGY BASE, TECHNOLOGY DEMONSTRATIONS, AND CUSTOMER FUNDED PROGRAMS IN THE FOLLOWING AREAS: MULTI-MODE SEEKERS, TARGETS AND BACKGROUNDS MODELING AND DISCRIMINATION, ADVANCED IMAGING AUTOTRACKERS, AUTONOMOUS ACQUISTION ALGORITHMS AND PROCESSORS, INTEGRATED SENSOR SUITES (SENSOR FUSION), ADVANCED RF DATALINKS. 2.1.3. THE CONTRACTOR SHALL ASSIST IN THE DEVELOPMENT OF GENERIC MODELS OF SPECIFIC SENSOR SYSTEMS FOR USE IN COMPARATIVE ANALYSES AND PERFORMANCE SIMULATIONS OF THESE SENSORS IN A VARIETY OF ENVIRONMENTAL BACKGROUND CONDITIONS AND SYSTEM CONFIGURATIONS. THE CONTRACTOR SHALL ASSIST IN THE DEVELOPMENT OF SYSTEM LEVEL PRELIMINARY DESIGN FOR FUNCTIONAL DEFINITION AND PRELIMINARY ENGINEERING LAYOUT ANALYSIS, SCALED SKETCHES, DRAWINGS, AND SCALED MODELS OF SELECTED SENSORS AND SYSTEMS. 2.1.4. THE CONTRACTOR SHALL ASSIST IN THE DEVELOPMENT OF TWO OR THREE DIMENSIONAL IMAGE 2 PROCESSING AND PATTERN RECOGNITION TECHNIQUES FOR AUTOMATIC TARGET LOCATION, TRACKING AND MISSILE GUIDANCE USING VIDEO, INFRARED, ACOUSTIC, AND MMW IMAGERY. TECHNIQUES CONSIDERED SHALL INCLUDE CONVENTIONAL METHODS SUCH AS PRESCREENING, SEGMENTATION, FEATURE EXTRACTION, CLASSIFIER DESIGNS, AS WELL AS CORRELATION, MATCHED FILTERS, MOVING TARGET ALGORITHMS, OPTICAL FLOW TECHNIQUES, 3-DIMENSIONAL MODELING, WIRE FRAME, AND STEREOSCOPIC PROJECTIONS. SOFTWARE FOR ACCOMPLISHING THESE FUNCTIONS SHALL BE IMPLEMENTED AND DEMONSTRATED IN CAPTIVE FLIGHT TEST (CFT) HARDWARE OR SYSTEM SIMULATIONS. THE CONTRACTOR SHALL ASSIST IN THE DESIGN, FABRICATION, AND TESTING OF HARDWARE FOR IMPLEMENTING THE ALGORITHMS IN STATE-OF-THE ART CIRCUITRY FOR ACHIEVING NEAR REAL-TIME OPERATION IN MISSILE BORNE PROCESSORS. 2.1.5. THE CONTRACTOR SHALL ASSIST IN THE DEVELOPMENT AND TESTING OF PROCESSING TECHNIQUES FOR EXPLOITING THE CAPABILITIES OF MULTIPLE SENSORS (SENSOR FUSION), ACTIVE AND PASSIVE, FOR THE AUTONOMOUS FUNCTIONS OF DETECTION, RECOGNITION, TARGET TRACKING, AND MISSILE GUIDANCE WHEN THE DIFFERENT SENSORS HAVE DISSIMILAR CHARACTERISTICS (ACOUSTIC, RF, IR, AND EO SENSORS). 2.1.6. THE CONTRACTOR SHALL PROVIDE TEST SUPPORT, AND FLIGHT TEST SUPPORT, IN THE FORM OF TEST PLANNING, HARDWARE INSTRUMENTATION DEVELOPMENT, HARDWARE INTEGRATION, ELECTRICAL AND MECHANICAL INTERFACE DESIGN AND FABRICATION, AIRCRAFT MODIFICATIONS, TEST OPERATIONS, DATA ACQUISITION AND REDUCTION FOR THE TEST AND EVALUATION OF SENSOR SYSTEMS. 2.1.7. THE CONTRACTOR SHALL ASSIST IN CONDUCTING TARGET SIGNATURE MEASUREMENTS AND ASSIST IN PERFORMING ANALYSES UTILIZING SPECIFIC SENSORS OR COMBINATIONS OF SENSORS. TESTS SHALL CONSIDER THE EFFECT OF SMOKE, DUST CLUTTER AND WEATHER ON THE TARGET AND SENSORS.

(4) POWERSTORE 3200T FIELD INSTALL, AND (4) APPSYNC FOR POWERSTORE

MILESTONE 1: CONTRACT SIGNATURE, MILESTONE 2: 30 DAYS PRIOR TO INSTALLATION, AND MILESTONE 3: TEST COMPLETION

THE AVMC SRD PROVIDES THE COMPLETE RANGE OF SPECIALTY ENGINEERING EXPERTISE AND ASSOCIATED TECHNICAL SUPPORT TO PROGRAMS AND PRODUCTS ON BEHALF OF A DIVERSE AND EXPANDING CUSTOMER BASE INCLUDING DEPARTMENT OF DEFENSE, DEPARTMENT OF STATE, OTHER GOVERNMENT AGENCIES, AND FOREIGN MILITARY SALES (FMS). SRD’S SPECIALTY ENGINEERING SUPPORT ACTIVITIES INCLUDE THE DEVELOPMENT, PRODUCTION, ACQUISITION, TEST AND EVALUATION, CERTIFICATION, DELIVERY, SUSTAINMENT, MODIFICATION, UPGRADE, AND RECLAMATION OF SUPPORTED AVIATION, MISSILE, GROUND, SEA, AND SOLDIER SYSTEMS AND ASSOCIATED DEVELOPMENT, PRODUCTION, AND SUSTAINMENT SUPPORT EQUIPMENT. THE INTENT OF THIS TASK ORDER IS TO PROVIDE A FOUNDATION CAPABILITY FOR SUPPORTING SRD’S CORE COMPETENCY OF MATERIEL SUITABILITY. THE CONTRACTOR TEAM SHALL ACCOMPLISH THIS THROUGH SUPPORTING A BROAD RANGE OF SPECIALTY ENGINEERING AND ANALYTICAL REQUIREMENTS FOR PROJECTS AND SYSTEMS SUPPORTED BY THE CCDC-SRD OR ITS CUSTOMERS ACROSS ITS CORE FUNCTIONAL SUPPORT AREAS OF PRODUCT ASSURANCE, AND PRODUCTION & SUSTAINMENT.

THE OBJECTIVE OF THIS EFFORT IS TO ACQUIRE ENGINEERING AND PROFESSIONAL SERVICES SUPPORTING AVIATION AND MISSILE ELEMENT MODELS, SIMULATIONS, AND ANALYSIS FOR THE CCDC AVMC, S3I DIRECTORATE, M&S AREA. THE M&S AREA PROVIDES VARIOUS TYPES OF MODELING AND SIMULATION SUPPORT TO ALL BRANCHES OF THE ARMED SERVICES, MULTIPLE PROGRAM OFFICES, AND OTHERS FOR DEVELOPMENT AND IMPROVEMENTS TO THEIR SYSTEMS. TASKS MAY ALSO INVOLVE RELATED NON-US SYSTEMS.

(1) TBE PROPOSAL NO. 2024-146; 3RD REVISION FFP MATERIAL/LABOR/SERVICE LOT PACKAGE

THE CONTRACTOR SHALL SUPPORT THE DECISION SUPPORT DIRECTORATE OF THE U.S. ARMY SPACE AND MISSILE DEFENSE COMMAND /ARMY FORCES STRATEGIC COMMAND (USASMDC/ARSTRAT), FUTURE WARFARE CENTER, IN THE AREAS OF OPERATIONAL ANALYSIS EXECUTION TO INCLUDE DATA MINING AND ASSESSMENT; EXERCISE, EXPERIMENTATION AND WARGAMING PREPARATION, PARTICIPATION AND DATA ASSESSMENT; AND CAMPAIGN/THEATER-LEVEL MODELING AND SIMULATION (M&S) DEVELOPMENT, SUSTAINMENT, AND EXECUTION. KEY AREAS TO BE SUPPORTED INCLUDE INTEGRATED AIR AND MISSILE DEFENSE (IAMD), SPACE, SPACE SUPERIORITY, HIGH ALTITUDE AND CYBERSPACE OPERATIONS. ANALYSIS WILL INCLUDE, BUT IS NOT LIMITED TO, PERFORMING FORCE-ON-FORCE OPERATIONAL ANALYSES; MILITARY UTILITY ANALYSES (MUA); EFFECTIVENESS ANALYSES; SYSTEMS ANALYSES; MILITARY ASSESSMENT STUDIES; PROCESS AND PROCESS FLOW ANALYSES; BUSINESS CASE ANALYSES; KNOWLEDGE MANAGEMENT ANALYSES; ANALYSES OF ALTERNATIVES (AOA); COST ANALYSES; AND COST-BENEFIT ANALYSES (CBA). THE CONTRACTOR SHALL ALSO CONDUCT ALL PHASES OF STUDIES AND ANALYSIS, TO INCLUDE JOINT CAPABILITIES INTEGRATION AND DEVELOPMENT SYSTEM (JCIDS), CONCEPT DEVELOPMENT AND PARTICIPATE IN EXTERNALLY GENERATED ARMY AND JOINT ANALYSIS; IAMD INTELLIGENCE, SURVEILLANCE AND RECONNAISSANCE (ISR) M&S SUPPORT INCLUDES USE OF TOOLS SUCH AS EXTENDED AIR DEFENSE SIMULATION (EADSIM), SYSTEM EFFECTIVENESS ANALYSIS SIMULATION (SEAS), JOINT CONFLICT AND TACTICAL SIMULATION (JCATS), RECONFIGURABLE TACTICAL OPERATIONS SIMULATOR (RTOS), COMMAND AND CONTROL, BATTLE MANAGEMENT AND COMMUNICATIONS (C2BMC) PLANNER, SYSTEMS TOOLKIT, SATELLITE ORBIT ANALYSIS PROGRAM, ONE-SEMI AUTOMATED FORCES (ONESAF) AND EXTEND.

1 THE INDIVIDUAL TECHNICAL DIRECTION WILL INDICATE WHETHER THE TASKS WILL BE PERFORMED AT CONTRACTOR OR GOVERNMENT FACILITIES. TRAVEL AND TASK PERFORMANCE MAY BE REQUIRED WITHIN THE CONTINENTAL UNITED STATES (CONUS). INFREQUENT OUTSIDE THE UNITED STATES (OCONUS) TRAVEL MAY ALSO BE REQUIRED. THE CONTRACTOR SHALL PROVIDE THE NECESSARY SKILLED PERSONNEL, TECHNICAL SUPPORT, EQUIPMENT, AND MATERIALS TO MEET THE OBJECTIVES AND TECHNICAL REQUIREMENTS IN THIS PWS, AS FURTHER SPECIFIED IN THE TECHNICAL DIRECTION. THE CONTRACTOR PERSONNEL SHALL BE PERMITTED TO SPEAK WITH FOREIGN REPRESENTATIVES FROM COUNTRIES AS DESCRIBED IN INDIVIDUAL TECHNICAL DIRECTION. WHEN DIRECTED TO DO SO BY THE GOVERNMENT CUSTOMER, COMPANIES PERFORMING SERVICES UNDER THIS CONTRACT WILL BE REQUIRED TO TRANSFER TECHNICAL DATA AND/OR SERVICES, AS DEFINED IN THE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS (ITAR), TO NON-US PARTIES WHO HAVE OR ARE IN THE PROCESS OF PURCHASING AMRDEC MANAGED WEAPONS SYSTEMS THROUGH THE FMS PROGRAM. FOR EACH TECHNICAL DIRECTION ISSUED UNDER THIS CONTRACT, THE CONTRACTOR SHALL PREPARE STATUS REPORTS AND FUNDS AND MAN-HOUR EXPENDITURE REPORTS. A STATUS REPORT SHALL BE PREPARED AND DELIVERED IN ACCORDANCE WITH (IAW) DI-MGMT-80368, CONTRACT DATA REQUIREMENT LIST (CDRL) A001. A CONTRACTOR�S PROGRESS STATUS AND MANAGEMENT REPORT SHALL BE PREPARED AND DELIVERED IAW DI-MGMT-80227, CDRL A003. THE CONTRACTOR SHALL BE REQUIRED TO ATTEND QUARTERLY MEETINGS TO ASSESS THE STATUS AND PROGRESS OF THE TECHNICAL DIRECTION.

1.0 MISSION OBJECTIVE: THE AVMC SRD PROVIDES THE COMPLETE RANGE OF SPECIALTY ENGINEERING EXPERTISE AND ASSOCIATED TECHNICAL SUPPORT TO PROGRAMS AND PRODUCTS ON BEHALF OF A DIVERSE AND EXPANDING CUSTOMER BASE INCLUDING DEPARTMENT OF DEFENSE, DEPARTMENT OF STATE, OTHER GOVERNMENT AGENCIES, AND FOREIGN MILITARY SALES (FMS). SRD€„¢S SPECIALTY ENGINEERING SUPPORT ACTIVITIES INCLUDE THE DEVELOPMENT, PRODUCTION, ACQUISITION, TEST AND EVALUATION, CERTIFICATION, DELIVERY, SUSTAINMENT, MODIFICATION, UPGRADE, AND RECLAMATION OF SUPPORTED AVIATION, MISSILE, GROUND, SEA, AND SOLDIER SYSTEMS AND ASSOCIATED DEVELOPMENT, PRODUCTION, AND SUSTAINMENT SUPPORT EQUIPMENT. THE INTENT OF THIS TASK ORDER IS TO PROVIDE A FOUNDATION CAPABILITY FOR SUPPORTING SRD€„¢S CORE COMPETENCY OF MATERIEL SUITABILITY. THE CONTRACTOR TEAM SHALL ACCOMPLISH THIS THROUGH SUPPORTING A BROAD RANGE OF SPECIALTY ENGINEERING AND ANALYTICAL REQUIREMENTS FOR PROJECTS AND SYSTEMS SUPPORTED BY THE CCDC-SRD OR ITS CUSTOMERS ACROSS ITS CORE FUNCTIONAL SUPPORT AREAS OF PRODUCT ASSURANCE, AND PRODUCTION & SUSTAINMENT. THE CONTRACTOR SUPPORT TARGETED BY THIS TASK ORDER INCLUDES THE SPECIALTY ENGINEERING, ACQUISITION, FIELDING, SUSTAINMENT, AND ASSOCIATED TECHNICAL SUPPORT/SUBJECT MATTER EXPERTISE NECESSARY TO ACCOMPLISH RESPONSIVE AND COST-EFFECTIVE ENGINEERING SOLUTIONS FOR THE SRD AND ITS CUSTOMER BASE. THE DISTINGUISHING ASPECT OF THIS TASK ORDER IS THE DEMONSTRATED TECHNICAL DEPTH REQUIRED OF THE SUPPORTING CONTRACTOR TEAM ACROSS EACH OF SRD€„¢S INDIVIDUAL DIVISIONALLY-ALIGNED SPECIALTY ENGINEERING AREAS OF EXPERTISE. THIS DEPTH IN THE SPECIFIC ENGINEERING AREAS CORE TO SRD€„¢S MATERIEL SUITABILITY MISSION SERVES TO FUNDAMENTALLY DIFFERENTIATE THIS TASK ORDER FROM EITHER THE HIGHER-LEVEL AND GENERALIZED TECHNICAL EXPERTISE REQUIRED TO SUPPORT S3I€„¢S SYSTEMS ENGINEERING MISSION, OR THE CORE RESEARCH EXPERTISE REQUIRED TO SUPPORT TDD€„¢S RESEARCH & DEVELOPMENT MISSION. WHILE IT IS UNDERSTOOD AND APPRECIATED THAT THE INDIVIDUAL SRD MATERIEL SUITABILITY BRANCHES MAY HAVE UNIQUE SUBJECT MATTER EXPERTISE REQUIREMENTS BEYOND THE SCOPE OF THIS BASELINE TASK ORDER AND THEREFORE REQUIRE OTHER EXTERNAL DEDICATED SUPPORT, IT IS THE INTENT OF SRD THAT THIS TASK ORDER PROVIDE ITS DIVISIONS WITH THE CORE ENGINEERING CAPABILITIES TO ACCOMPLISH A LARGE CROSS-SECTION OF THEIR INDIVIDUAL SPECIALTY ENGINEERING MISSIONS. THE INTENDED SCOPE OF THIS TASK ORDER DOES INCLUDE ENGINEERING AND TECHNICAL SUPPORT FOR THE LIMITED OVERLAP OF THE AIRWORTHINESS MISSION INTO THE MATERIEL SUITABILITY AREAS OF QUALITY ENGINEERING AND INDUSTRIAL OPERATIONS TO THE EXTENT DEFINED BY THE INDIVIDUAL TECHNICAL DIRECTIONS. ADDITIONALLY, ANY PROPOSED CONTRACTOR TEAM LEADERSHIP SHALL ALSO PROVIDE TECHNICAL SUPPORT TO REDUCE TASK LOAD ON THE TOTAL AVMC CONTRACTOR WORK FORCE. A UNIQUE ASPECT OF EFFORTS UNDER THIS TASK ORDER IS THAT THEY ARE FOCUSED ON THE PERSPECTIVE OF AN OPERATOR AND/OR MAINTAINER. THE SUPPORT TO ACCOMPLISH THESE TASKS WILL BE IDENTIFIED BY INDIVIDUAL TECHNICAL DIRECTIONS (TDS) DEFINING

THE CONTRACTOR SHALL SUPPORT IN THE PERFORMANCE OF SYSTEM ENGINEERING, THEORETICAL ANALYSES, SIMULATION AND MODELING, RESEARCH AND DEVELOPMENT HARDWARE DESIGN, SOFTWARE/ALGORITHM DEVELOPMENT, HARDWARE FABRICATION, SYSTEM INTEGRATION, ELECTRICAL AND MECHANICAL INTERFACE DESIGN, HARDWARE IDENTIFICATION AND PROCUREMENT, TEST PLANNING, TEST SUPPORT AND DATA ACQUISITION, REDUCTION AND REPORTING TO SUPPORT RESEARCH AND DEVELOPMENT FOR THE FOLLOWING CATEGORIES OF SENSOR SYSTEMS, SUBSYSTEMS, AND TECHNOLOGY USED FOR MISSILE GUIDANCE AND FIRE CONTROL APPLICATIONS: TERMINAL HOMING SYSTEMS INCLUDING BOTH PASSIVE AND ACTIVE SENSORS SUCH AS INFRARED (IR), RADIO FREQUENCY (RF), MILLIMETER WAVE (MMW), ELECTRO OPTICAL (EO) AND ACOUSTIC WITH AND WITHOUT FIBER OPTIC OR RF DATA LINKS TO THE GROUND AND/OR OTHER AERIAL VEHICLE; COMMAND GUIDANCE INCLUDING LASER, MMW, RF, AND WIRE; SEMI-ACTIVE GUIDANCE INCLUDING LASERS AND RF ILLUMINATORS; DUAL MODE GUIDANCE INCLUDING VARIOUS COMBINATIONS OF SENSORS, GUIDANCE MODES, GROUND AND AIRBORNE PLATFORM SENSOR SYSTEMS FOR DETECTION, RECOGNITION, IDENTIFICATION AND TRACKING TO SUPPORT TARGET ENGAGEMENT.

WORK PERFORMED IN SUPPORT OF AMSA PWS

SERVICES TO DEVELOP, INTEGRATE, AND SUSTAIN TECHNOLOGY SOLUTIONS AND CAPABILITIES FOR ALL MANNED AND UNMANNED DEPARTMENT OF DEFENSE (DOD) GROUND SYSTEMS AND COMBAT SUPPORT SYSTEMS TO IMPROVE CURRENT FORCE EFFECTIVENESS AS WELL AS PROVIDE SUPERIOR CAPABILITIES FOR THE FUTURE FORCE.

WEAPON SYSTEM ENGINEERING

EXECUTES PROCESSES THAT PRODUCE THE SYSTEM-LEVEL ENGINEERING STANDARDS AND TECHNICAL DOCUMENTATION; ENSURES SOUND AND INTEGRATED ENGINEERING AND MANUFACTURING PROCESSES AND PRODUCTS; THOROUGH ELEMENT ENGINEERING CONTROLS, MANAGEMENT, AND VERIFICATION; INDEPENDENT TEST, ANALYSI;COORDINATES THE DEVELOPMENT OF TECHNOLOGY- BASED SOLUTIONS THAT ENABLE FUTURE CAPABILITIES;DIRECTS AND MANAGES DESIGN, DEVELOPMENT, SYSTEMS INTEGRATION AND TESTING OF SENSOR AND COMMAND AND CONTROL ELEMENT PROGRAMS

LABOR SERVICES

SERVICES

AEROSPACE SUPPORT

ARMAG CORPORATION

ENGINEERING SERVICES

SERVICE

R&D SERVICES

ADVISE AND ASSIST SERVICES

SERVICES

THE CONTRACTOR SHALL PROVIDE TECHNICAL EXPERTISE TO MEET MISSION REQUIREMENTS OF THE SYSTEMS AND WARHEADS FUNCTION, PROPULSION AND STRUCTURES DIVISION, WEAPONS DEVELOPMENT AND INTEGRATION (WDI) DIRECTORATE, COMBAT CAPABILITIES DEVELOPMENT COMMAND AVMC (CCDC AVMC). MISSION REQUIREMENTS TO BE SUPPORTED CONSIST OF, WARHEAD DESIGN, DEVELOPMENT, ANALYSIS; MODELING, FABRICATION, PRODUCTION, TEST AND EVALUATION FOR MISSILE AND ROCKET SYSTEMS; INTEGRATION OF LETHAL MECHANISMS ON SYSTEMS TO INCLUDE ANTI-ARMOR, AIR DEFENSE, MILITARY OPERATIONS IN URBAN TERRAIN (MOUT), HYPERVELOCITY AND OTHER TECHNOLOGY TEST BED DEMONSTRATIONS IN SUPPORT OF THE AMCOM MISSION; AIR AND GROUND SYSTEMS DESIGN AND TESTING; FUZING SUPPORT IN THE AREAS OF ELECTRONIC AND MECHANICAL SAFE AND ARM DEVICES AND TARGET DETECTION SYSTEMS, AND COMPOSITES AND MATERIALS FOR MISSILE AND AVIATION SYSTEMS.